Standing Seam – Snap Lock Accessories

Angular Ride

It closes the roof to the top at the intersection of two slopes, acting as a shield against seepage.

Half Ridge

It closes the roof at the top and prevents seepage under the cover. It is used for one slope roofs.

Ridge support

It is mounted under the angular ridge in order to facilitate and mask the ridge fastening points.

Valley

It is mounted under the cover at the junction of two slopes and it directs the water towards the rainwater system.

Large Rain Shadow Border

It connects to the drainage system allowing water to drain from the cover to the gutter.

Big Overlapping Element

It is used at the junction of the Retro Panel panel with the slope breaking.

Small Rain Shadow Border

It connects to the drainage system allowing water to drain from the cover to the gutter.

Sidewall Border

It is used at the intersection of the slopes with fire walls, dividing walls. It prevents water to seep on the wall.

Horizontal Wall Border

It is used at the intersection of the slopes with fire walls, dividing walls. It prevents water to seep on the wall.

Gable Border

It closes the sides of the roof covering the roof structure edges. It is assembled over the fascia board, after the fastening of the tile plates.

Small Overlapping Element

It is used to join two Retro Panel sheets if the roof is longer and requires the use of two panels.

Snow stopper

It is assembled on the cover and prevents snow slides off the roof.

Universal Sealing Tape

It is used on the valley and under the ridge. It has a sealing role.

Concave and Convex Slope Breaking

It is used in areas where roof slopes change their pitch.

Butyl Tipe

Flexible self-adhesive waterproofing tape recommended for insulation and anti-moisture protection.

Woodscrew

It fastens the sheet plates and accessories on the wood lath.

Submit your question

Ask for a sample / estimate