Large semicircular ridge
It closes the roof to the top at the intersection of two slopes, acting as a shield against seepage.
Small semicircular ridge
The alternative for the large ridge, it closes the roof to the top at the intersection of two slopes, acting as a shield against seepage.
Ridge closure
It seals and at the same time prevents the birds’ access.
Ridge cap
It seals and at the same time prevents the birds’ access.
Valley
It is mounted under the cover at the junction of two slopes and it directs the water towards the rainwater system.
Rain shadow border
It connects to the drainage system allowing water to drain from the cover to the gutter.
Wall border
It is used at the intersection of the slopes with firewalls, dividing walls. It prevents water to seep on the wall.
Gable Border
It closes the sides of the roof covering the roof structure edges. It is assembled over the fascia board, after the fastening of the tile plates.
Gable border under the tile
It closes the sides of the roof and is assembled over the fascia board, before the fastening of the tile plates.
Fastening plates onto the wall
It is used at the intersection of one slope with a wall and prevents water to seep on the wall.
Slope breaking
It is used in areas where roof slopes change their pitch.
Snow stopper
It is assembled on the cover and prevents snow slides off the roof.
Omega snow stopper
It is an alternative to conventional snow stoppers.
Funnel set
It is mounted at the base of the funnel and it prevents water to seep in along the funnel walls.
Under gable flashing
This element is used to prevent water infiltration if the eaves are not positioned at right angles to the gable line.16.
Bitumen tape
Flexible self-adhesive waterproofing tape recommended for insulation and anti-moisture protection.
Funnel set
It is used on the valley and under the ridge. It has a sealing role.
Woodscrew
It fastens the sheet plates and accessories on the wood lath.
Grandemat
Glossy
Mat
Submit your question
Ask for a sample / estimate